NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
Numerical Simulation of Boundary Layer Ingesting (BLI) Inlet-Fan InteractionFuture civil transport designs may incorporate engine inlets integrated into the body of the aircraft to take advantage of efficiency increases due to weight and drag reduction. Additional increases in engine efficiency are predicted if the inlet ingests the lower momentum boundary layer flow. Previous studies have shown, however, that efficiency benefits of Boundary Layer Ingesting (BLI) ingestion are very sensitive to the magnitude of fan and duct losses, and blade structural response to the non-uniform flow field that results from a BLI inlet has not been studied in-depth. This paper presents an effort to extend the modeling capabilities of an existing rotating turbomachinery unsteady analysis code to include the ability to solve the external and internal flow fields of a BLI inlet. The TURBO code has been a successful tool in evaluating fan response to flow distortions for traditional engine/inlet integrations, such as the development of rotating stall and inlet distortion through compressor stages. This paper describes the first phase of an effort to extend the TURBO model to calculate the external and inlet flowfield upstream of fan so that accurate pressure distortions that result from BLI configurations can be computed and used to analyze fan aerodynamics and structural response. To validate the TURBO program modifications for the BLI flowfield, experimental test data obtained by NASA for a flushmounted S-duct with large amounts of boundary layer ingestion was modeled. Results for the flow upstream and in the inlet are presented and compared to experimental data for several high Reynolds number flows to validate the modifications to the solver. Quantitative data is presented that indicates good predictive capability of the model in the upstream flow. A representative fan is attached to the inlet and results are presented for the coupled inlet/fan model. The impact on the total pressure distortion at the AIP after the fan is attached is examined.

Document ID
20150000132
Acquisition Source
Glenn Research Center
Document Type
Conference Paper
Authors
Giuliani, James
(Ohio State Univ. Columbus, OH, United States)
Chen, Jen-Ping
(Ohio State Univ. Columbus, OH, United States)
Beach, Timothy
(Coyote Hollow Consulting, LLC Walton Hills, OH, United States)
Bakhle, Milind
(NASA Glenn Research Center Cleveland, OH, United States)
Date Acquired
January 5, 2015
Publication Date
July 28, 2014
Subject Category
Aircraft Propulsion And Power
Report/Patent Number
GRC-E-DAA-TN15952
Report Number: GRC-E-DAA-TN15952
Meeting Information
Meeting: AIAA/ASME/SAE/ASEE Joint Propulsion Conference
Location: Cleveland, Ohio
Country: United States
Start Date: July 28, 2014
End Date: July 30, 2014
Sponsors: American Society of Mechanical Engineers, Society of Automotive Engineers, Inc., American Society for Engineering Education, American Inst. of Aeronautics and Astronautics
Funding Number(s)
CONTRACT_GRANT: NNC10BA16B
CONTRACT_GRANT: NNC12TA86T
Distribution Limits
Public
Copyright
Public Use Permitted.
Keywords
Inlet Fan Interactions
Unsteady Flow
Boundary Layer Ingestion
No Preview Available