Demonstration of Nautilus Centripetal Capillary Condenser TechnologyThis paper describes the results of a proof of concept effort for development of a Nautilus Centripetal Capillary Condenser (NCCC or NC3) used for microgravity compatible water recovery from moist air with integral passive phase separation. Removal of liquid condensate from the air stream exiting a condenser is readily performed here on Earth. In order to perform this function in space however, without gravity or mechanical action, other tactics including utilization of inertial, drag and capillary forces are required. Within the NC3, liquid water forms via condensation on cold condenser surfaces as humid air passes along multiple spiral channels, each in its own plane, all together forming a stacked plate assembly. Non-mechanical inertial forces are employed to transfer condensate, as it forms, via centripetal action to the outer perimeter of each channel. A V-shaped groove, constructed on this outer edge of the spiral channel, increases local capillary forces thereby retaining the liquid. Air drag then pulls the liquid along to a collection region near the center of the device. Dry air produced by each parallel spiral channel is combined in a common orthogonal, out-of-plane conduit passing down the axial center of the stacked device. Similarly, the parallel condensate streams are combined and removed from the condenser/separator through yet another out-of-plane axial conduit. NC3 is an integration of conventional finned condenser operation, combined with static phase separation and capillary transport phenomena. A Mars' transit mission would be a logical application for this technology where gravity is absent and the use of vibrating, energy-intensive, motor-driven centrifugal separators is undesired. Here a vapor stream from either the Heat Melt Compactor or the Carbon dioxide Reduction Assembly, for example, would be dried to a dew point of 10 deg using a passive NC3 condenser/separator with the precious water condensate recycled to the water bus.
Document ID
20170001282
Acquisition Source
Glenn Research Center
Document Type
Conference Paper
Authors
Wheeler, RIchard (Umpqua Research Co. Myrtle Creek, OR, United States)
Tang, Linh (Umpqua Research Co. Myrtle Creek, OR, United States)
Wambolt, Spencer (Umpqua Research Co. Myrtle Creek, OR, United States)
Golliher, Eric (NASA Glenn Research Center Cleveland, OH United States)
Agui, Juan (NASA Glenn Research Center Cleveland, OH United States)
Date Acquired
February 3, 2017
Publication Date
July 10, 2016
Subject Category
Fluid Mechanics And Thermodynamics
Report/Patent Number
GRC-E-DAA-TN33774Report Number: GRC-E-DAA-TN33774
Meeting Information
Meeting: International Conference on Environmental Systems (ICES)
Location: Vienna
Country: Austria
Start Date: July 10, 2016
End Date: July 14, 2016
Sponsors: International Conference On Environmental Systems, Inc.