NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Press Enter or click the Search button to begin your search.

Back to Results
Reconstructed Parachute System Performance During the Second LDSD Supersonic Flight Dynamics TestNASA’s Low-Density Supersonic Decelerators project (LDSD) has developed and tested four new aerodynamic decelerator technologies for future Mars missions: two attached toroidal inflatable decelerators, a ballute, and a large supersonic parachute. On June 8, 2015, the project conducted a high-altitude, supersonic flight test of a 30.5-meter supersonic Ringsail (SSRS) canopy at the US Navy’s Pacific Missile Range Facility (PMRF) on Kauai, HI. This test, the second in a series of Supersonic Flight Dynamics Tests (SFDT-2), allowed the LDSD project to test the deployment and performance of its parachute decelerator system in the wake of a representative test vehicle (a 4.7-meter aeroshell and 6-meter toroidal inflatable aerodynamic decelerator) at conditions relevant to Mars entry for the second time. The parachute decelerator system consisted of the SSRS main parachute and a 4.4-meter ballute (called the parachute deployment device, or PDD) for its extraction. The ballute was mortar-deployed at a Mach number of 2.78 and a dynamic pressure of 493 Pa, and inflated with the aid of a water-methanol based gas generator. After flying in the wake of the test vehicle for ten seconds, the PDD was released and allowed to extract the main parachute pack. The SSRS reached line-stretch at a Mach number of 2.37 and dynamic pressure of 602 Pa. Following full inflation, the propagation of a tear in the canopy led to the failure of the parachute skirt band and to the subsequent failure of the vent band. The test vehicle was instrumented with load sensors, inertial sensors, and high-speed and high resolution cameras that provided data on the performance of the PDD and SSRS through deployment, inflation, and flight. This paper describes the resulting reconstructed behavior of the PDD and SSRS during deployment and inflation, their aerodynamic performance on SFDT-2, the failure of the SSRS shortly after full inflation, and the LDSD project’s investigation into its underlying causes.
Document ID
20190025585
Acquisition Source
Jet Propulsion Laboratory
Document Type
Conference Paper
External Source(s)
Authors
O'Farrell, Clara
(Jet Propulsion Lab., California Inst. of Tech. Pasadena, CA, United States)
Brandeau, Erich J.
(Jet Propulsion Lab., California Inst. of Tech. Pasadena, CA, United States)
Tanner, Christopher L.
(Jet Propulsion Lab., California Inst. of Tech. Pasadena, CA, United States)
Gallon, John C.
(Jet Propulsion Lab., California Inst. of Tech. Pasadena, CA, United States)
Muppidi, Suman
(NASA Ames Research Center Moffett Field, CA, United States)
Clark, Ian G.
(Jet Propulsion Lab., California Inst. of Tech. Pasadena, CA, United States)
Date Acquired
June 3, 2019
Publication Date
June 13, 2016
Subject Category
Spacecraft Design, Testing And Performance
Report/Patent Number
JPL-CL-16-1934
Report Number: JPL-CL-16-1934
Meeting Information
Meeting: Atmospheric Flight Mechanics Conference
Location: Washington, DC
Country: United States
Start Date: June 13, 2016
End Date: June 17, 2016
Sponsors: American Institute of Aeronautics and Astronautics (AIAA)
Distribution Limits
Public
Copyright
Other

Available Downloads

There are no available downloads for this record.
No Preview Available