A Cellular Backshell Concept for a Planetary Entry Vehicle

The development of an alternative, novel backshell concept to replace the traditional approach for the backshell of a planetary entry vehicle, was initiated in this study. The motivation was to determine if the novel concept, with the potential to provide significant improvements compared to the traditional approach, would be feasible. In initiating this effort, two cellular-type structures were chosen for evaluation. Preliminary structural finite element analysis models of just a single backshell panel were created for both a traditional design and the cellular concepts. Structural results revealed similar behavior for all the models. Although these initial results predicted higher mass values for the cellular structures, eventually adding more variables to the cell structure to further tailor the cellular concept, may significantly lower the mass predicted, and is justification for further study. Additionally, a novel approach to the thermal protection system of the cellular structures was proposed that included the use of advanced thermal blanket insulation. Thermal sizing analysis was performed for a simplified planetary entry heating condition producing a preliminary thermal design. However, further development and testing will be needed to determine if the proposed novel thermal protection approach, in conjunction with the cellular structure, would be an attractive alternative candidate backshell concept for future planetary entry vehicles.