EMU CO2 Washout Comparative Assessments for the HAB/HAP-E in support of EVA 80

After water was reported in the EMU helmet during ISS US EVA-80, mitigation strategies were created to attempt to arrest the motion of any droplets that enter the helmet for future Extravehicular Activities (EVAs). This included adding absorbent materials into the interior of the helmet. But before a mitigation strategy can be implemented, it must first be proven to be safe. Towards this aim, a computational fluid dynamics (CFD) model was developed to assess the effect that the absorbent material has on the concentration of carbon dioxide in the EMU helmet. Within a small, closed volume such as a helmet, some amount of the carbon dioxide produced by the suit-wearer will be re-inhaled before being cleared from the oral-nasal region. The ability of the suit to remove carbon dioxide is referred to as CO2 washout. Pathological levels of inhaled CO2 (hypercapnia) are associated with dizziness, fatigue, and headaches. The CFD model was built in ANSYS Fluent and adapted to assess CO2 washout in a variety of scenarios grouped into three categories: purge cases, varying metabolic rates, and varying sorbent material configurations. The presence of the sorbent material did not prove detrimental to CO2 washout in the helmet.