A Simple Boundary-Layer Transition Detection Method Using Mean Static Pressure Measurements

A simple method for detecting boundary-layer transition using only mean static pressure port data is presented. The method can be applied to most existing models with pressure taps, and only requires that a fine angle-of-attack sweep be performed. A small but abrupt change in the static pressure is visible when the transition front passes over the pressure tap. Results from a recent Juncture Flow test entry are used to illustrate the technique. Infrared thermography measurements of the transition front compare very well to the transition locations obtained from the static pressure ports. Some differences in behavior occur depending on the dominant transition mechanism. While the technique is somewhat qualitative, it can be an excellent tool for estimating the transition location when other tools are not readily available. Given the simplicity of the technique, and the fact that most wind-tunnel models are already designed with numerous static pressure taps, this method can be applied with very little overhead.