HF Vapor Etching for Stardust Particle Extraction: A Progress Report

The Stardust mission captured thousands of particles from Jupiter-family comet 81P/Wild 2 using aluminum foil and silica aerogel collection media [1]. Most studies of Wild 2 material examine refractory terminal particles >1 μm in diameter which are extracted individually from the ends of tracks produced by the particle’s impact into the aerogel medium. A substantial (>65 %) mass fraction of the impactors is present as fine-grained (i.e. <1 μm) material in the ‘bulb’ and walls of the tracks, which may contain preserved organic material and presolar grains [2]. Few presolar grains have been identified in Stardust samples, which has been interpreted as owing to destruction upon impact into the foils and preferential sampling of terminal particles rather than a lack of presolar grains in Wild 2 samples [3-5]. By isolating the fine-grained material from these bulbs and performing microbeam and isotopic analyses (i.e., scanning electron microscopy and NanoSIMS), organic matter and presolar grains can be identified and constraints can be placed on the constituents of primitive outer solar system materials.