The Repair Maintenance and Fabrication Facility in the Common Habitat Architecture

The Common Habitat Architecture seeks to increase the habitability of long-duration human spaceflight systems. A key aspect of this is vehicle survivability. Missions beyond low Earth orbit need onboard capabilities for Repair, Maintenance, And Fabrication (RMAF) to overcome potential contingency scenarios. Strategies employed in historic human spaceflight such as redundancy management, reliability, sparing, orbital replacement units, and aborts may be insufficient by themselves. Based on subject matter input, a list of 53 critical failures defining a set of incidents that can render a key spacecraft subsystem inoperable were generated. A subsequent analysis found that a robust in-space RMAF system capable of performing 14 key functions can potentially repair a subsystem plagued by any of these failures. An ancillary benefit is this capability may provide psychological benefits to the crew, by enabling greater self-sufficiency in earth-independent problem solving. A basic RMAF facility has been defined for the Common Habitat, consisting of five workstations. A work bench and computer workstation provide a multipurpose horizontal work surface, computing interface, and tools storage. A CNC machining center provides a subtractive manufacturing capability for metals and plastics. A multi-material 3D printing facility provides additive manufacturing capabilities for plastic, metals, and printed electronics. A welding facility is used for joining metal components where a higher strength is needed than can be achieved with fasteners or adhesives. A glovebox facility is used to perform work that is too hazardous for any of the other workstations. This may include hardware brought in from outside the spacecraft that could potentially contaminate the cabin environment. Forward work includes considering the accommodation of additional manufacturing processes not modeled in the current system, assessing the ability of systems to operate in partial gravity and microgravity environments, incorporation of the system into the Common Habitat Computer Aided Design (CAD) model, bottoms-up mass estimating, and a crew time analysis.