Controls Modeling Approach for Deployment of a Large Thin Structures for Solar Sails

One of the principal challenges with solar sails is to safely deploy the large sail structures while simultaneously maintaining attitude control. This challenge includes changing moments and products of inertia along with large sail shape uncertainties as it transitions from stowed to the fully deployed shape at the end of the deployment. With these changes, the control system must manage any potential momentum buildup and keep the pointing within mission requirements. The attitude determination and control system team for Solar Cruiser, a 1600 square meter solar sail project out of Marshall Space Flight Center, approached this problem by modeling the nominal moments and products of inertia for different stages of deployment from 10% to 100% in 10% increments. At each step, the inertias were used to generate tuned PID gains, which were used as part of a nominal deployment analysis to prevent unintentional slewing and tumbling. The team created and analyzed off nominal cases, where the moments of inertia and products were changed to induce uncertainties for the control system to manage during deployment. These cases helped verify that the control system can handle off-nominal deployments as well as any uncertainties occurring during deployment of the space sail system. This paper will show this method can be successfully used for modeling solar sail deployments as part of the attitude control system.