Results of a statistical approach to rainfall estimation using Nimbus 5 6.7 micrometers and 11.5 micrometers THIR data

Nimbus 5 6.7 mm and 11.5 mm temperature humidity infrared radiometer (THIR) data were used in a simple multiple regression scheme to test the feasibility of using these data to estimate hourly rainfall. Throughout the test area (85 W to 105 W and 45 N to 30 N) subareas (8 deg x 6 deg) were chosen from which point to point and areal statistics were obtained. Four subsets of data were used. The first consisted of only those surface stations indicating precipitation whose latitude and longitude coincided with the THIR grid points. A second used surface stations 0.1 degree from the THIR grid points. The third was a combination of subsets one and two. A reciprocal distance weighting scheme was used to derive precipitation values in data sparse areas. A fourth subset was made using these data combined with the data from subsets one and two. Point estimates resulted in negative correlations between estimated and grid derived "surface" precipitation. One degree areal estimates showed a slight improvement with a correlation coefficient of approximately 0.11. Single regression areal estimates resulted in correlations of approximately 0.11 and 0.20 for the 6.7 mm and 11.5 mm data respectively. These poor results were attributed to problems which are inherent in the satellite data (location errors, short temporal span of data, wavelength of sensors, etc.) and the lack of sufficient surface data to better verify the satellite estimate.