Effects of thermally induced porosity on an as-HIP powder metallurgy superalloyThe effect of thermally induced porosity on the mechanical properties of an as-hot-isostatically pressed and heat-treated pressing made from low carbon Astroloy is examined. Tensile, stress-rupture, creep, and low cycle fatigue tests were performed and the results were compared with industrial acceptance criteria. It is shown that the porous pressing has a porosity gradient from the rim to the bore with the bore having 1-1/2% greater porosity. Mechanical properties of the test ring below acceptance level are tensile reduction in area at room temperature and 538 C and time for 0.1% creep at 704 C. It is also found that the strength, ductility, and rupture life of the rim are slightly inferior to those of the rim of the sound pressings, while those of the bore are generally below the acceptable level. At strain ranges typical of commercial aircraft engines, the low cycle fatigue life of the rim of the porous pressings is slightly lower than that of the sound pressings.
Document ID
19800045820
Acquisition Source
Legacy CDMS
Document Type
Conference Paper
Authors
Dreshfield, R. L. (NASA Lewis Research Center Cleveland, OH, United States)
Miner, R. V., Jr. (NASA Lewis Research Center Cleveland, Ohio, United States)