NTRS - NASA Technical Reports Server

Back to Results
Manufacturing stresses and strains in filament wound cylindersTests were performed to verify a previously developed model for simulating the manufacturing process of filament wound cylinders. The axial and hoop strains were measured during cure inside a filament wound Fiberite T300/976 graphite-epoxy cylinder. The measured strains were compared to those computed by the model. Good agreements were found between the data and the model, indicating that the model is a useful representation of the process. For the conditions of the test, the manufacturing stresses inside the cylinder were also calculated using the model.
Document ID
Acquisition Source
Legacy CDMS
Document Type
Reprint (Version printed in journal)
Calius, E. P.
(Stanford Univ. CA, United States)
Kidron, M.
(Stanford Univ. CA, United States)
Lee, S. Y.
(Stanford Univ. CA, United States)
Springer, G. S.
(Stanford University CA, United States)
Date Acquired
August 13, 2013
Publication Date
June 1, 1988
Publication Information
Publication: SAMPE Journal
Volume: 24
ISSN: 0091-1062
Subject Category
Mechanical Engineering
Accession Number
Distribution Limits

Available Downloads

There are no available downloads for this record.
No Preview Available