NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
Rust transformation/rust compatible primersProper surface preparation has been the key to obtain good performance by a surface coating. The major obstacle in preparing a corroded or rusted surface is the complete removal of the contaminants and the corrosion products. Sandblasting has been traditionally used to remove the corrosion products before painting. However, sandblasting can be expensive, may be prohibited by local health regulations and is not applicable in every situation. To get around these obstacles, Industry developed rust converters/rust transformers and rust compatible primers (high solids epoxies). The potential use of these products for military equipment led personnel of the Belvoir Research, Development and Engineering Center (BRDEC) to evaluate the commercially available rust transformers and rust compatible primers. Prior laboratory experience with commercially available rust converters, as well as field studies in Hawaii and Puerto Rico, revealed poor performance, several inherent limitations, and lack of reliability. It was obvious from our studies that the performance of rust converting products was more dependent on the amount and type of rust present, as well as the degree of permeability of the coating, than on the product's ability to form an organometallic complex with the rust. Based on these results, it was decided that the Military should develop their own rust converter formulation and specification. The compound described in the specification is for use on a rusted surface before the application of an organic coating (bituminous compounds, primer or topcoat). These coatings should end the need for sandblasting or the removing of the adherent corrosion products. They also will prepare the surface for the application of the organic coating. Several commercially available rust compatible primers (RCP) were also tested using corroded surfaces. All of the evaluated RCP failed our laboratory tests for primers.
Document ID
19930012993
Acquisition Source
Legacy CDMS
Document Type
Conference Paper
Authors
Emeric, Dario A.
(Army Belvoir Research and Development Center Fort Belvoir, VA, United States)
Miller, Christopher E.
(Army Belvoir Research and Development Center Fort Belvoir, VA, United States)
Date Acquired
September 6, 2013
Publication Date
February 1, 1993
Publication Information
Publication: NASA, Washington, Technology 2002: The Third National Technology Transfer Conference and Exposition, Volume 2
Subject Category
Nonmetallic Materials
Accession Number
93N22182
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available