Passive Stability on an Entry Vehicle to Enhance Crew Survival

The most desirable crew survival feature for an entry vehicle is probably a full coverage escape system. With full coverage escape, crew survival is maintained for a wide range of failures by the allowing the crew to escape from the failed vehicle and performing the entry to touchdown flight phase in an alternative system. However, there are considerable challenges in providing a separate entry capability, and for some programs, requiring full coverage escape could result in program cancellation. An alternative means of providing for crew survival if the flight control system fails is to design a return vehicle that can enter without active attitude control. A study was performed to assess the feasibility of performing a totally passive entry. Lift over drag has a major impact on performing a passive entry, so a parametric of three typical lift over drag concepts was performed. First an assessment of historical entry vehicles was completed. Second an assessment of end of mission entry trajectories and entry trajectories initiated from ascent abort profiles were made. Trajectories for a wide array of pitch, yaw, and roll rates were made. Third, six-degree-of freedom analyses of the entry were performed. FOP a truly passive return, the entry vehicle must trim in only the heat shield forward orientation. An assessment of the effect of center of gravity placement to achieve this orientation was made.