NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
Assessing Tactical Scheduler Options for Time-Based Surface MeteringNASA is committed to demonstrating a concept of integrated arrival, departure, and surface operations by 2020 under the Airspace Technology Demonstration 2 (ATD2) sub-project. This will be accomplished starting with a demonstration of flight specific time-based departure metering at Charlotte Douglass International Airport (CLT). ATD2 tactical metering capability is based on NASAs Spot And Runway Departure Advisor (SARDA) which has been tested successfully in human-in-the-loop simulations of CLT. SARDA makes use of surface surveillance data and surface modeling to estimate the earliest takeoff time for each flight active on the airport surface or ready for pushback from the gate. The system then schedules each flight to its assigned runway in order of earliest takeoff time and assigns a target pushback time, displayed to ramp controllers as an advisory gate hold time. The objective of this method of departure metering is to move as much delay as possible to the gate to minimize surface congestion and engine on-time, while keeping sufficient pressure on the runway to maintain throughput. This flight specific approached enables greater flight efficiency and predictability, facilitating trajectory-based operations and surface-airspace integration, which ATD2 aims to achieve.Throughout ATD2 project formulation and system development, researchers have continuously engaged with stakeholders and future users, uncovering key system requirements for tactical metering that SARDA did not address. The SARDA scheduler is updated every 10 seconds using real-time surface surveillance data to ensure the most up-to-date information is used to predict runway usage. However, rapid updates also open the potential for fluctuating advisories, which Ramp controllers at a busy airport like CLT find unacceptable. Therefore, ATD2 tactical metering requires that all advisories freeze once flights are ready so that Ramp controllers may communicate a single hold time when responding to pilot ready calls.
Document ID
20170011531
Acquisition Source
Ames Research Center
Document Type
Presentation
Authors
Zelinski, Shannon
(NASA Ames Research Center Moffett Field, CA, United States)
Windhorst, Robert
(NASA Ames Research Center Moffett Field, CA, United States)
Date Acquired
December 6, 2017
Publication Date
September 17, 2017
Subject Category
Air Transportation And Safety
Report/Patent Number
ARC-E-DAA-TN46864
Meeting Information
Meeting: Digital Avionics Systems Conference (DASC)
Location: Saint Petersburg, FL
Country: United States
Start Date: September 17, 2017
End Date: September 21, 2017
Sponsors: Institute of Electrical and Electronics Engineers
Distribution Limits
Public
Copyright
Public Use Permitted.
No Preview Available