Some Considerations in the Determination of the Accuracy of a Measurement in Space of the Newtonian Gravitational Constant (G)

A commonly suggested method for determining the Newtonian constant of universal gravitation (G) is to observe the motion of two bodies of known mass moving about each other in an orbiting laboratory. In low Earth orbit (LEO), bodies constructed of even the densest material available experience a gravitational attraction that is several times smaller than the 'tidal' forces (due to their proximity to the Earth), which tend to pull them apart. While the tidal forces do not preclude stable orbits of the two objects about each other, they and the Coriolis force (in the rotating laboratory) dominate the motion, and the gravitational attraction of the two bodies may be considered a weak (but significant) contribution to the motion. As a result, compared to an experiment that would be performed in a laboratory far from the Earth, greater accuracy of measuring the motion of the two bodies may be required for a given accuracy in the determination of G. We find that the accuracy with which positions must be determined is not much different in an experiment in LEO than in one performed far from the Earth, but that rotational periods must be determined more accurately. Using a curvature matrix analysis, we also find that a value of G may be extracted (with some loss in accuracy, but probably some practical gain) from an analysis of the time dependence of the distance between the bodies rather than of a full specification (distance and direction) of their relative positions. A measurement of the gravitational constant to one part in 10(exp 4) continues to be thinkable, but one part in 10(exp 5) will be very difficult.