NIAC Project: 10 meter Sub-Orbital Large Balloon Reflector (LBR)

In Section 1 we summarize the technological approaches to the Large Balloon Reflector (LBR) that are discussed at length in our Phase I Technical report. Within each subsection we highlight how the work was advanced in Phase II. In Section 2 the work and lessons learned from the 3 and 5 meter LBR prototypes are described. In Section 3 the LBR Sensor Package stratospheric flight is described. Section 4 puts LBR in the context of on-going NASA missions.In Sections 5 and 6 the dissemination of results and plans to realize a stratospheric LBR are discussed. Instead of attempting to maintain the pointing of a large telescope at the end of a tether, we propose to deploy a telescope in the benign, protected environment within the carrier balloon. The telescope is itself a balloon, spherical in shape, metalized on one side and anchored to the top of the carrier balloon via a rotating azimuth plate (see Figure 2). The carrier balloon serves as both a stable mount and a radome for the inner balloon reflector. Light from space (or the atmosphere or ground) first passes through the ~2 mil thick polyethylene skin of the carrier balloon and then through the ~1 mil thickMylar side of the inner balloon. Together these layershave < 8% absorption at the wavelengths of interest.The incoming light then encounters the aluminized,spherical, back surface of the inner balloon and isthen focused into a receiving system. To achieve the performance of a 10 meter parabolic reflector, a 20 meter diameter inner balloon can be used with a modest size (~1 meter) spherical corrector.