NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
PIV and Rotational Raman-Based Temperature Measurements for CFD Validation of a Perforated Plate Cooling Flow: Part IFilm cooling is used in a wide variety of engineering applications for protection of surfaces from hot or combusting gases. The design of more efficient film cooling geometries/configurations could be facilitated by an ability to accurately model and predict the effectiveness of current designs using computational fluid dynamics (CFD) code predictions. Hence, a benchmark set of flow field property data was obtained to assess current CFD capabilities and develop better modeling approaches for these turbulent flow fields where accurate calculation of turbulent heat flux is important. Both Particle Image Velocimetry (PIV) and spontaneous rotational Raman scattering (SRS) spectroscopy were used to acquire high quality, spatially-resolved measurements of the mean and root mean square (rms) velocities as well as the mean and rms temperatures in a film cooling flow field. In addition to off-body flow field measurements, infrared thermography (IR) and thermocouple measurements on the plate surface enabled estimates of the film effectiveness. Raman spectra in air were obtained across a matrix of axial locations downstream from a 68.07 mm square nozzle blowing heated air over a range of temperatures (up to TR = 2.7) and Mach numbers (up to Mach 0.9), across a 30.48 cm long plate equipped with three patches of 45 small (~1 mm) diameter cooling holes arranged in a staggered configuration. In addition, both streamwise 2-component PIV (on the plate centerline) and cross-stream 3-component Stereo PIV data at 14 axial stations were collected in the same flows. Only a subset of the data collected in the test program is included in this Part I report. The rest of the data will be published in a future report, Part II, along with planned CFD predictions of the complex cooling film flow. The entire data set of Raman temperature data, PIV velocity data and IR camera data covering the Set Points 23 and 49 in the test matrix in Table 1 is available in an accompanying DVD (available online from www.sti.nasa.gov) for those interested in further analysis.
Document ID
20200000514
Acquisition Source
Glenn Research Center
Document Type
Conference Paper
Authors
Wernet, Mark P.
(NASA Glenn Research Center Cleveland, OH, United States)
Georgiadis, Nicholas J.
(NASA Glenn Research Center Cleveland, OH, United States)
Locke, Randy J.
(Vantage Partners, LLC Brook Park, OH, United States)
Thurman, Douglas R.
(Army Research Lab. Cleveland, OH, United States)
Poinsatte, Philip E.
(NASA Glenn Research Center Cleveland, OH, United States)
Date Acquired
January 23, 2020
Publication Date
January 6, 2020
Subject Category
Fluid Mechanics And Thermodynamics
Report/Patent Number
GRC-E-DAA-TN75668
Meeting Information
Meeting: AIAA SciTech Forum
Location: Orlando, FL
Country: United States
Start Date: January 6, 2020
End Date: January 10, 2020
Sponsors: American Institute of Aeronautics and Astronautics (AIAA)
Funding Number(s)
WBS: 109492.02.03.05.01
CONTRACT_GRANT: NNC12BA01B
Distribution Limits
Public
Copyright
Public Use Permitted.
Technical Review
NASA Peer Committee
Keywords
Nozzle
No Preview Available