CFD Validation Study of a Hypersonic Cone-Slice-Flap Configuration

Model validation is the process of determining the degree of accuracy between the real world and the model. The result of model validation can either be used to improve the model through calibration or quantify the model-form uncertainty. This work focuses on providing the model-form uncertainty through an area metric for a hypersonic cone-slice-flap geometry configuration given uncertainty in both the simulation and experimental data. A procedure will be presented that can give an accurate representation of the model-form uncertainty using a small number of high-fidelity runs. The work will also assess the impact between using different high-fidelity solvers and different turbulence models.The goal of performing this comparison is to provide a quantifiable measurement for the accuracy of each solver and turbulence model for this type of design. A low-fidelity analysis will also be performed to get a model-form uncertainty for the lower fidelity analysis. The two high-fidelty CFD solvers used are VULCAN-CFD and FUN3D and the low-fidelity results will come from Cart3D. The experimental data came from the 20-inch Mach 6Tunnel located at NASA Langley Research Center.