NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Collections About News Help Login
Back to Results
Instability in Rotating MachineryThe proceedings contain 45 papers on a wide range of subjects including flow generated instabilities in fluid flow machines, cracked shaft detection, case histories of instability phenomena in compressors, turbines, and pumps, vibration control in turbomachinery (including antiswirl techniques), and the simulation and estimation of destabilizing forces in rotating machines. The symposium was held to serve as an update on the understanding and control of rotating machinery instability problems.
Document ID
19860020688
Acquisition Source
Legacy CDMS
Document Type
Conference Proceedings
Date Acquired
September 5, 2013
Publication Date
December 1, 1985
Subject Category
Mechanical Engineering
Report/Patent Number
NAS 1.55:2409
NASA-CP-2409
E-2652
Report Number: NAS 1.55:2409
Report Number: NASA-CP-2409
Report Number: E-2652
Accession Number
86N30160
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.

Related Records

IDRelationTitle19860020715WorkRotor internal friction instability19860020699WorkInfluence of design parameters on occurence of oil whirl19860020710WorkVertical reactor coolant pump instabilities19860020692WorkMeasurement of rotor system dynamic stiffness by perturbation testing19860020691WorkSimulation of non-linear bearing forces for post-stability investigation19860020725WorkPartial rotor-to-stator rub demonstration19860020701WorkWhirl and whip: Rotor/bearing stability problems19860020709WorkPump instability phenomena generated by fluid forces19860020695WorkTwo-phase flows within systems with ambient pressure19860020702WorkSome new results concerning the dynamic behavior of annular turbulent seals19860020707WorkMeasuring dynamic oil film coefficients of sliding bearing19860020732WorkData presentation techniques for rotating machinery malfunction diagnosis19860020722WorkDemonstration of various rotor instabilities (exhibit of Bently Rotor Dynamics Research Corporation Laborator rigs at symposium on instability in rotaing machinery)19860020716WorkTopping turbine (103-JAT) rotor instability in 1150-STPD Kellogg ammonia plants19860020713WorkMagnetic bearings for vibration control19860020700WorkBackward whirl in a simple rotor supported on hydrodynamic bearings19860020729WorkRotor/bearing system dynamic stiffness measurements19860020711WorkPrediction of destabilizing blade tip forces for shrouded and unshrouded turbines19860020721WorkChanges of instability thresholds of rotor due to bearing misalignments19860020726WorkRotor instability due to loose rotating part19860020723WorkWhirl/whip demonstration19860020708WorkCracked shaft detection on large vertical nuclear reactor coolant pump19860020720WorkEigenvalues and stability problems of rotors19860020690WorkInstability analysis procedure for 3-level multi-bearing rotor-foundation systems19860020704WorkOil seal effects and subsynchronous vibrations in high-speed compressors19860020727WorkInstability in hydraulic machines demonstration rig19860020694WorkTurbine instabilities: Case histories19860020696WorkModeling of elastically mounted vertical rotor19860020705WorkEffect of coulomb spline on rotor dynamic response19860020730WorkShaft mode shape demonstration19860020728WorkCracked rotor demonstration19860020717WorkHydraulic induced instability on a vertical service19860020703WorkAnalytical prediction of labyrinth-seal-flow-induced arotor excitation forces19860020718WorkAerodynamic instability: A case history19860020689WorkFull load shop testing of 18,000-hp gas turbine driven centrifugal compressor for offshore platform service: Evaluation of rotor dynamics performance19860020712WorkIdentification of bearing and seal dynamic stiffness parameters19860020724WorkAnti-swirling demonstration19860020693WorkWhy have hydrostatic bearings been avoided as a stabilizing element for rotating machines19860020689WorkFull load shop testing of 18,000-hp gas turbine driven centrifugal compressor for offshore platform service: Evaluation of rotor dynamics performance19860020690WorkInstability analysis procedure for 3-level multi-bearing rotor-foundation systems19860020691WorkSimulation of non-linear bearing forces for post-stability investigation19860020692WorkMeasurement of rotor system dynamic stiffness by perturbation testing19860020693WorkWhy have hydrostatic bearings been avoided as a stabilizing element for rotating machines19860020694WorkTurbine instabilities: Case histories19860020695WorkTwo-phase flows within systems with ambient pressure19860020696WorkModeling of elastically mounted vertical rotor19860020697WorkExperimental verification and practical application of torquewhirl theory of rotordynamic instability19860020698WorkCO2 compressor vibration and cause analysis19860020699WorkInfluence of design parameters on occurence of oil whirl19860020700WorkBackward whirl in a simple rotor supported on hydrodynamic bearings19860020701WorkWhirl and whip: Rotor/bearing stability problems19860020702WorkSome new results concerning the dynamic behavior of annular turbulent seals19860020703WorkAnalytical prediction of labyrinth-seal-flow-induced arotor excitation forces19860020704WorkOil seal effects and subsynchronous vibrations in high-speed compressors19860020705WorkEffect of coulomb spline on rotor dynamic response19860020706WorkRotor-to-stator rub vibration in centrifugal compressor19860020707WorkMeasuring dynamic oil film coefficients of sliding bearing19860020708WorkCracked shaft detection on large vertical nuclear reactor coolant pump19860020709WorkPump instability phenomena generated by fluid forces19860020710WorkVertical reactor coolant pump instabilities19860020711WorkPrediction of destabilizing blade tip forces for shrouded and unshrouded turbines19860020712WorkIdentification of bearing and seal dynamic stiffness parameters19860020713WorkMagnetic bearings for vibration control19860020714WorkActive magnetic bearings for optimum turbomachinery design19860020715WorkRotor internal friction instability19860020716WorkTopping turbine (103-JAT) rotor instability in 1150-STPD Kellogg ammonia plants19860020717WorkHydraulic induced instability on a vertical service19860020718WorkAerodynamic instability: A case history19860020719WorkRemarks on rotor stability (A contribution to discussion during symposium on instability in rotating machinery)19860020720WorkEigenvalues and stability problems of rotors19860020721WorkChanges of instability thresholds of rotor due to bearing misalignments19860020722WorkDemonstration of various rotor instabilities (exhibit of Bently Rotor Dynamics Research Corporation Laborator rigs at symposium on instability in rotaing machinery)19860020723WorkWhirl/whip demonstration19860020724WorkAnti-swirling demonstration19860020725WorkPartial rotor-to-stator rub demonstration19860020726WorkRotor instability due to loose rotating part19860020727WorkInstability in hydraulic machines demonstration rig19860020728WorkCracked rotor demonstration19860020729WorkRotor/bearing system dynamic stiffness measurements19860020730WorkShaft mode shape demonstration19860020731WorkOrbits: Computer simulation19860020732WorkData presentation techniques for rotating machinery malfunction diagnosis19860020731WorkOrbits: Computer simulation19860020714WorkActive magnetic bearings for optimum turbomachinery design19860020706WorkRotor-to-stator rub vibration in centrifugal compressor19860020697WorkExperimental verification and practical application of torquewhirl theory of rotordynamic instability19860020698WorkCO2 compressor vibration and cause analysis19860020719WorkRemarks on rotor stability (A contribution to discussion during symposium on instability in rotating machinery)
No Preview Available