NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Due to the lapse in federal government funding, NASA is not updating this website. We sincerely regret this inconvenience.

Back to Results
Integrated Control Design for A Partially Turboelectric Aircraft Propulsion SystemElectrified Aircraft Propulsion (EAP) holds great potential for reducing aviation emissions and fuel burn. A variety of EAP architectures have been proposed including partially-turboelectric configurations that combine turbofan engines with motor-driven propulsors. Such architectures exhibit coupling between subsystems and thus require an integrated control solution. To address this need, this paper presents an integrated control design strategy for a commercial single-aisle partially-turboelectric aircraft concept consisting of two wing-mounted turbofan engines and an electric motor driven tailfan propulsor. Within this architecture the turbofans serve the dual purpose of generating thrust and supplying mechanical offtake power used to generate electricity for the tailfan motor. The propulsion control system is tasked with coordinating turbofan and tailfan operation under both steady-state and transient scenarios. The paper introduces a linear state-space representation of the architecture reflecting the coupling between the turbofan and tailfan subsystems along with loop transfer functions reflecting open- and closed-loop system dynamics. Also discussed is an applied strategy for scheduling the tailfan setpoint command based on the average sensed fan speed of the two turbofans. This approach ensures synchronized operation of the turbofan and tailfan subsystems while also allowing the turbofan fuel control design to be simplified. Performance of the integrated control design is assessed through a real-time hardware-in-the-loop test conducted at the NASA Electric Aircraft Testbed. During this test a scaled version of the electrical system and turbomachinery shaft dynamics were implemented in electrical machine hardware and evaluated under closed-loop control. Results from this facility test are presented to illustrate the efficacy of the applied integrated control design approach under steady-state and transient scenarios including a full-flight mission profile.
Document ID
20230008327
Acquisition Source
Glenn Research Center
Document Type
Presentation
Authors
Donald L. Simon
(Glenn Research Center Cleveland, Ohio, United States)
Santino J. Bianco
(Glenn Research Center Cleveland, Ohio, United States)
Marcus A. Horning
(HX5, LLC)
Date Acquired
May 30, 2023
Subject Category
Aircraft Propulsion and Power
Report/Patent Number
GT2023-100921
Meeting Information
Meeting: Turbomachinery Technical Conference & Exposition (Turbo Expo)
Location: Boston, MA
Country: US
Start Date: June 26, 2023
End Date: June 30, 2023
Sponsors: General Electric (United States), American Society of Mechanical Engineers
Funding Number(s)
WBS: 081876.02.03.10.01.01.04
CONTRACT_GRANT: GEARS-80GRC020D000
Distribution Limits
Public
Copyright
Public Use Permitted.
Technical Review
NASA Technical Management
Keywords
Electrified Aircraft Propulsion
Aircraft Propulsion Controls
Integrated Control Design
No Preview Available